Adapter for eccentric 3D measurement
In industrial surveying, measuring points whose 3D coordinates have to be recorded or checked are sometimes not in direct visual access of the total station. It is quite time-consuming to determine a new location for the measuring head for each of these points. One possible solution are target rods. With these you can measure points and record them from one point. The concept behind this is quite simple but efficient. By means of the 2 or 4 points, which lie on a straight line and whose distance is known, the coordinate of the measuring point is determined by a geometrical calculation. The recommended target distance is 20m.
GLM provides five different target rods and two different holders:
Magnetic holder, light
Description: DZ_Mod_base_holder
Code number: OMS5100740
Magetic base holder, heavy
Description: DZ_Mod_base_holder_heavy
Code number: OMS5100412
Fourfold target adapter
Fourfold target for hidden points. With hardened steel tip.
Distance reflective targets-tip:
100mm / 200mm / 300mm / 400mm
Code number: OMS5101040
Paired target adapters
Paired target for hidden points. With hardened steel tip.
Description | Distance reflective targets to tip: | Code number | DZ_Mod_2RT100_200 | 100 / 200 mm | OMS5100741 |
DZ_ Mod_2RT250_50 | 250 / 500 mm | OMS5100413 |
DZ_Mod_2RT500_750 | 500 / 750 mm | OMS5100414 |
DZ_Mod_2RT600_1200 | 600 / 1200 mm | OMS5100415 |
Do you need further accessories? Then take a look at our extensive selection by clicking here